Charging Units

Charging Units
Sort By:  
Nitecore Q2 Intellicharger Battery Charger
Nitecore Q2 Battery Charger
Add to Cart
$19.99
Nitecore Q4 Intellicharger Battery Charger
Nitecore Q4 Battery Charger
Add to Cart
$29.99
Nitecore Q6 Intellicharger Battery Charger
Nitecore Q6 Battery Charger - Six Bay
$0.00
Nitecore, Digi D2,  Wall Charger
Nitecore Digi D2 Wall Charger
$0.00
Nitecore Digi D4 Wall Charger
Nitecore Digi D4 Wall Charger
$0.00
Nitecore Q2 Intellicharger Battery Charger
Nitecore Q2 Battery Charger (Nitecore Q2)

Product Features:

Nitecore Q2 Charger

Nitecore Q2 charger is an essential addition to any vaper’s arsenal. Equipped with two bays, each bay is independently monitored and charged, offering complete safety and assurance. The Q2 is capable of charging a single battery up to 2A, and two batteries at 1A each. Constructed out of flame retardant and fire resistant PC materials, the Q2 has been designed with safety in mind. Equipped with an LED light above each bay, the Q2 gives users insight into the charge of their batteries at a quick glance. A red LED means charging is in progress, and green means your and your batteries are good to go. The intelligent internals of the Q2 automatically detect the battery status and applies the optimal charging mode for the battery so you don’t have to.

Specifications:
Dual Bay Battery Charger
Dimensions: 125.4*59.6*36.2mm
Input: DC 12V 1000mAh 12W
Output: 4.2V ± 1% 1A×2, 2A×1
Independent Battery Charging & Monitoring
Two Charging Modes: Constant Current, Constant Voltage
Automatic Battery Detection
Automatic Optimal Charging Mode Selection
Optimized IMR Charging system
LED Battery Life Indicator
Flame Retardant Construction
Reverse Polarity Protection
Short Circuit Protection
Overcharge Protection
Certifications: RoHS, CE, FCC, & CEC.

Package Contents:
1 x Q2 Charger
1 x US Power Cord
1 x User Manual
1 x Warranty Card.



Charging Batteries Disclaimer

Vapecity509.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VapeCity509 is not responsible for any damage for any reason.


Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. 
Nitecore Q2 Battery Charger
Add to Cart
$19.99
Nitecore Q4 Intellicharger Battery Charger
Nitecore Q4 Battery Charger (Nitecore Q4)

Product Features:

Your charger doesn't have to be the boring black or white color you have bought in the past. With the Nitecore Q4 Quick Charger you can find a color that matches your style. Now available in four unique colors you can get your charger in: Lemonade, Blackberry, Pinky Peach, and Juicy Mango. Nitecore understands that everyone is different and you do not always have to be trapped in a box; it is time to let your uniqueness shine. So don't miss out on the opportunity to charge your Li-Ion/IMR batteries in style!

Features
  • Can charge 4 x Li-Ion batteries independently at the same time
  • Uses two charging modes: Constant Current and Constant Voltage
  • Detects battery power level and will choose the correct voltage and charging mode necessary
  • Automatic shut-off once battery is charged
  • RoHS, CE, FCC, and CEC Certified
  • Overcharging, reverse polarity, and short circuit prevention to fully protect your batteries while charging
  • Constructed of fire proof materials that can prevent accidental fires
  • LED charging indicators
  • Compatible with car chargers making charging on the go a capability
Specifications:
  • Input: DC 12V 2000mA 24W
  • Output: 4.2V±1% | 1A*4, 2A*2
  • Compatible with:
    • Li-ion / IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340 (RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700
  • Dimensions:
    • Length - 4.94" (125.48 mm)
    • Width - 3.76" (95.50 mm)
    • Height - 1.43" (36.32 mm)
  • Weight: 5.3 oz (150.3 g)


Charging Batteries Disclaimer

Vapecity509.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VapeCity509 is not responsible for any damage for any reason.


Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. 
Nitecore Q4 Battery Charger
Add to Cart
$29.99
Nitecore Q6 Intellicharger Battery Charger
Nitecore Q6 Battery Charger - Six Bay (Nitecore Q6)

Product Features:

6 Bay Battery Charger
Each Bay is Individually Controlled by Independent Chips
Auto Current Selection
Based on Battery Capacity
Compatible with Lithium Ion/LiFePO4/Ni-Mh/Ni-Mh Batteries
Li-ion/IMR: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 22700, 25500, 26500, 26650, 26700
Optimized for IMR Batteries
Maximum Charging Rates
2A Dual Battery Charging
1A Four Battery Charging
0.65A Six Battery Charging
2.1A USB output
Battery Identification
Red Indicator
Charging in Progress
Green Indicator
Charging Complete
Over Charge/Over Time/Short Circuit/Reverse Polarity Protection
Fire Preventative Polycarbonate Housing

Product Includes:
One Nitecore New Q6 Charger
Power Cord
Manual
Warranty Card


Charging Batteries Disclaimer

Vapecity509.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

NOTE: There is an inherent risk with the use of any and all rechargeable batteries in any circumstance. VapeCity509 is not responsible for any damage for any reason.


Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. 
Nitecore Q6 Battery Charger - Six Bay
Nitecore, Digi D2,  Wall Charger
Nitecore Digi D2 Wall Charger (Nitecore Digi D2 Wall Charger)

Nitecore Digi D2 Wall Charger


Features:
- Charges 2 Batteries Simultaneously
- Each of the two battery slots monitors and charges independently
- Optimized charging design for IMR batteries
- Integrated LCD panel clearly displays charging parameters and progress
- Two conveniently located side buttons allow easy selection of specific battery types and charging parameters
- Intelligent circuitry detects the battery type and status before entering automatic charge mode
- Automatically detects battery power status and selects the appropriate voltage and charge mode
- Automatically stops charging when complete
- Features over-charge prevention to protect batteries
- Features temperature monitoring to prevent overheating
- Made from Durable ABS
- Features reverse polarity protection
- Certified by RoHS, CE, FCC and CEC

Specifications:
- Input: AC 100-240V 50/60Hz 0.25A (max), DC 12V 1A
- Output Voltage: 4.2V / 3.7V / 1.48V
- Output Current: 500Max2

Compatible With:
Li-ion / IMR / LiFePO4: 26650, 22650, 18650, 17870, 18490, 17500, 16340 (RCR123), 14500, 10440
Ni-MH / Ni-Cd: AA, AAA, AAAA, C
Dimensions: 143mmx74mmx36mm
Weight: 168g (without batteries and power cord)



charging batteries disclaimer
  • Vapecity509.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

Nitecore Digi D2 Wall Charger
Nitecore Digi D4 Wall Charger
Nitecore Digi D4 Wall Charger (Nitecore Digi D4 Wall Charger)

Nitecore Charger D4 Four Bay

  • Capable of charging four batteries simultaneously
  • Each of the four battery slots monitors and charges independently
  • Compatible with and identifies Li-ion (26650, 22650, 18650, 17670, 18490, 17500, 18350, 16340(RCR123), 14500, 10440), Ni-MH and Ni-Cd (AA, AAA, AAAA) rechargeable batteries
  • Optimized charging design for IMR batteries
  • Integrated LCD panel clearly displays charging parameters and progress
  • Two conveniently located side buttons allow easy selection of specific battery types and charging parameters
  • Intelligent circuitry detects the battery type and status before entering automatic charge mode (CC, CV, dV/dt)
  • Automatically detects battery power status and selects the appropriate voltage and charge mode (with the exception of LiFePO4 batteries which require manual selection)
  • Compatible with LiFePO4 batteries
  • Compatible with small capacity batteries
  • Automatically stops charging when complete
  • Features over-charge prevention to protect batteries
  • Features temperature monitoring to prevent overheating
  • Made from durable ABS (fire retardant / flame resistant)
  • Features reverse polarity protection
  • Designed for optimal heat dissipation
  • Certified by RoHS, CE, FCC and CEC


charging batteries disclaimer
  • Vapecity509.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.


Nitecore Digi D4 Wall Charger
Per Page      1 - 5 of 5
  • 1